Showing all 22 results
-
-
8″ to 14″ Power Brush
456.00 kr8″ to 14″ Power Brush (8″ Soft bristle inner 14″ Medium bristle outer) brush featuring protective ball end ideal for power sweeping square chimneys. Connection to fit powersweeping single buttonlock.
-
Branch Breaker
410.00 krHeavy duty twin nest hook designed to assist removing birds nests and dislodging/ breaking branches.
-
Flueboss Flexible Vent Shaft Kit 2 metre
2,340.00 krFlueboss Flexible Vent Shaft Kit- 2 Metre Flueboss flexible vent shaft kit. The Flueboss vent shaft has a rotating shaft within a heavy duty nylon sheath. Very flexible and lightweight allows easy rotating within 90 degree bends making this ideal for cleaning of hard to reach areas, each end has our single button female and…
-
Flueboss Flexible Vent Shaft Kit 3 metre
2,678.00 krFlueboss flexible vent shaft kit. The Flueboss vent shaft has a rotating shaft within a heavy duty nylon sheath. Very flexible and lightweight allows easy rotating within 90 degree bends making this ideal for cleaning of hard to reach areas, each end has our single button female and male connections allowing easy connection to desired…
-
Flueboss Flexible Vent Shaft kit 5 metre
3,271.00 krFlueboss flexible vent shaft kit. The Flueboss vent shaft has a rotating shaft within a heavy duty nylon sheath. Very flexible and lightweight allows easy rotating within 90 degree bends making this ideal for cleaning of hard to reach areas, each end has our single button female and male connections allowing easy connection to desired…
-
FlueBoss Replacement Nylon (Per Metre)
40.00 krFlueBoss Replacement Nylon for use with FlueBoss head. Supplied in multiples of 1 metre.
-
FlueBoss Replacement Nylon (per roll)
1,562.00 krFlueBoss Replacement Nylon whip line available in a roll of: 3mm diameter 150m roll (used for FlueBoss MINI and Biomass) 4mm diameter 100m roll (FlueBoss Standard) SKU: PSRN02
-
FlueBoss Rod Guide
219.00 krThe FlueBoss Powersweeping rod guide is ideal for protecting rods from sharp edges inside an appliance whilst spinning. Also fitted with a 38mm T piece which can be connected to a vacuum.
SKU: PSGH01
-
Large Breaker 10cm x 15cm
629.00 krLarge breaker 10 x 15cm in thick 10mm mild steel plate zinc plated, only use with rigid rods with extreme caution, breakers exert large stress to the rods and invalidate our warranty. Not suitable for metal chimneys or liners. SKU: PSB02SB
-
Large breaker 10cm x 15cm
440.00 krLarge breaker 10 x 15cm in thick 10mm mild steel plate zinc plated, this offset breaker allows a more powerful breaking action within the chimney, only for use with rigid rods with extreme caution, breakers exert large stress to the rods and invalidate our warranty.
Not suitable for metal chimneys or liners.
SKU: PSB03SB
-
Large Breaker 10cm x 15cm Offset
429.00 krLarge breaker 10 x 15cm in thick 10mm mild steel plate zinc plated, this offset breaker allows a more powerful breaking action within the chimney, only for use with rigid rods with extreme caution, breakers exert large stress to the rods and invalidate our warranty. Not suitable for metal chimneys or liners. SKU: PSB03SB
-
Pipe Scraper 5″ (125mm)
339.00 krFor scraping inside of 5″ fluepipes and register plates (rod not included). SKU: PSPS01
-
Pipe Scraper 6″ (150mm)
349.00 krFor scraping inside of 6″ fluepipes and register plates (rod not included). SKU: PSPS02
-
Pipe Scraper 7″ (180mm)
359.00 krFor scraping inside of 7″ fluepipes and register plates (rod not included). SKU: PSPS03
-
Refil til FlueBoss Kabel (per 1m)
50.00 krReplacement 4mm cable for use with FlueBoss head. Supplied in multiples of 1 metre.
-
Replacement Power Chain (per 1m)
50.00 krPower replacement chain for use with PowerChain head. Supplied in multiples of 1 metre.
-
Single Angled Scraper
399.00 krSingle angle scraper mild steel plate zinc plated for scraping deposits off large masonry flues. Not suitable for metal chimneys or liners. SKU: PSS01SB
-
Small Breaker 10cm x 10cm
560.00 krSmall breaker 10 x 10cm in thick 10mm mild steel plate zinc plated, only use with rigid rods with extreme caution, breakers exert large stress to the rods and invalidate our warranty. Not suitable for metal chimneys or liners. SKU: PSB01SB
-
Sotluketetting av skumgummi
290.00 krVed tetting av sotluke ved feiing med roterende feiing.Passer til standard teglskorstein 25X25
-
Standing Rod Caddy Bag with lid
1,236.00 krStanding Rod Caddy Bag with lid Additional information Dimensions 108 × 20 × 20 cm Manufacturer Rodstation FRBCB01
-
Twin Angled Scraper
410.00 krTwin angle scraper mild steel plate zinc plated for scraping deposits off large masonry flues. Not suitable for metal chimneys or liners. SKU: PSS02SB